Colorful skull:
replica HYT SKULL Watches 48.8 launched in green, red and blue
HYT's "Hydraulic Mechanical Watchmaker" is expanding its skeleton-themed timepiece series with three new titanium case cases. Each case is equipped with a new galvanized, milky lacquered green , Red or blue skull dial to match the hue of the case. The working time of each watch is displayed.
Like previous watches, the watch is housed in a 48.8 mm titanium case, satin-finished and sandblasted, and uses colored liquid-flowing through thin capillaries and controlled by the expansion and contraction of two vertical bellows in the movement-with Keep track of the hours with the help of the digital scale around the dial. (For a complete description of how HYT watches save time, please read our article. In the HYT skull, this fluid-filled tube conforms to the contours of the skull, that is, bent at four angles, instead of being found in early HYT watches like H1. The semicircular arc bends and H2.
Review fake watches
Another reason that makes the Skull model different from these previous models is that there is no separate pointer to indicate the minutes. Different from the other two models, the HYT skull mainly hides it, while the other two models provide the wearer with a striking movement appearance from the side of the dial, but mainly hide it in the front, and focus on The eye-catching skull icon on the front-here is a bold paint color, which makes it different from the previous skull of HYT, which has a more metallic feel and only shows a glance of the vertical bellows.
Like the previous generations of HYT Skull watches, the right eye of the dial skull serves as the power reserve indicator of the watch: a series of translucent colored inserts are used, each of which has a slightly different color change, so as As the color changes, the eyes gradually darken. The 65-hour energy of the movement is about to run out. In the left eye, in addition to working hours, the only other time indicator is: the continuously rotating seconds indicator. Both eyes have subtle honeycomb patterns that increase their depth. The 48.8mm case (17.9 inches thick) is slightly trimmed than the original Skulls 51mm case, and has a black rubber sheath, titanium crown and titanium alloy crown protector, as well as a hemispherical, non-reflective sapphire crystal on the dial on.
Best replica watches
Equipped with HYT manual winding 28,800 vph movement, the bevel bridge, rhodium-plated bellows and Geneva wave decoration can be seen through the transparent sapphire back cover. Each watch uses a gray technical fabric strap and rubber core. Green, red or blue to echo the main colors of the skull dial and titanium folding clasp.
replica HYT H2 watches hydraulic mechanical watch released
The hydromechanical watch expert (also known as HYT) finally released the second watch after the sensational H1 last year. The new watch is H2, which creates a new dimension in terms of mechanical and visual interest, not just adding new complexity. Before making everyone excited about H2, let us review the H1 watch here and review the meaning of H1.
HYT shared the H2 H2 movement with us. The image looks like the face of a robot and is the prelude to the upcoming technologically sophisticated watch that involves design and style as well as timepieces. HYT collaborated with Giulio Papi of APRP to help design and produce the H2 movement. In short, this movement is actually less complex than the first movement (removing the sub-second dial). However, with the increase in power reserve and the complexity of the structure, the H2 movement is more of a technical challenge.
https://www.cheapestwrist.com
Unlike HYT H1, H2 will only be part of a limited edition. This may apply to the entire series, or it may apply to this version of the DLC black-coated titanium case. The work is 48.8 mm wide, very large, with impressive posture and visual effects. Of course, what remains is the green liquid hour indicator tube, which uses a bellows to push the liquid on an hour scale. Now, the bellows is in the V-shaped direction, which is also part of the symmetrical movement that makes up the dial. The dial-type balance wheel is located to the right of the 12 o'clock position, and the crown function selector is located to the right (please note whether the watch is in neutral, time setting or winding mode).
The hours and minutes are displayed on a retrograde scale. Regarding the design, there is some very Urwerk feel, the reading time is impressive, and it is hard to read. This is a difficult thing, because we found that most "experimental" timetable methods just sacrifice convenience. The dial also has a unique power reserve indicator in the form of an exposed spring! When the power reserve is full, the spring will be tightly wound and unwind when the spring is used up. After the hand-wound movement is fully wound, it will have a power reserve of eight full days.
HYT tried its best to conceal the fact that H2 is completely related to high-end attractiveness and experimental technical style. The design of the movement is completely "cool", almost conceptual. For collectors and modern gadget lovers, this is a timepiece. It just shrugged under the appeal of Patek Philippe and said to the rich: "Hey! What you really want is a big and big wrist Cool stuff, it looks (and expensive). This is not your grandfather's watch." Like it or hate it, this is the essence of H2 and the overall meaning of the HYT brand.
https://www.chronowrist.ru
Series: H2
Reference: 248-DL-00-GF-RA limited edition, a total of 50 pieces
Technical data:
Case:
Black DLC titanium, polished, micro-sprayed and satin-finished-
Diameter: 48.8 mm
-Height: 17.9 mm
-Tighten down the dynamometer crown wrapped in rubber
-Protected crown
-Lugs-
Titanium dome at six o'clock
-Dome sapphire crystal (box with anti-reflective coating) -Sapphire
Screw back cover
-Water resistant to 50 meters
Features:-
Counterclockwise
Movement-The minute hand beats at 30 minutes-
Crown Position Indicator (HNR)
-Temperature indicator
movement:
Mechanical watch, manual winding, exclusive HYT movement, 21,600 vibrations per hour, 3 Hz, 28 jewels-
Titanium watch bridge, decorated with micro-sprayed black PVD and titanium satin finish
-192 hours (8 days) power reserve
Dial: sapphire minute scale
Strap: anthracite rubber alligator leather, black DLC titanium pin buckle
